A personnel lift is a hydraulic work platform that gives staff access to the work point for maintenance, installation and similar jobs at height. Powerlift scissor personnel lifts are standard products manufactured in series by Şahlan Hidrolik Makina; Hidroteknik is authorised for sales, service and spare parts. Working through the points below is enough to choose the right model.
The catalogue gives two different heights. Platform height is the highest point the platform floor can reach. Working height is the height a person standing on the platform can reach, and it is greater than the platform height. When choosing a model, compare the height of the point you need to reach with the working height; check physical limits such as ceilings, beams or doorways against the platform height and closed height.
All three models have a maximum lifting capacity of 200 kg. Width is 1280 mm, length 2630 mm and length including the drawbar 3800 mm. Motor power is 1.5 kW on a 220 V supply, the platform rises at 5.30 m/min and lowering speed is adjustable. Closed height excluding guardrails is 1120 mm for the HPM/T-850, 1270 mm for the HPM/T-1000 and 1430 mm for the HPM/T-1200.
When checking capacity, include the weight of tools and materials taken onto the platform as well as the operators.
The HPM/T series is towable: it can be pulled behind a vehicle with its tow hitch and can also be lifted by forklift. It runs on 165/80/R13 tyres. The inner turning radius is 3675 mm and the outer turning radius 5225 mm; keep these in mind when planning access routes.
The platform has wide-angle mechanical outriggers with spirit levels that fold out and lock in place. Width is 1140 mm with outriggers closed and 2720 mm with them open. Make sure there is room at the work site for the outriggers to open fully.
The personnel lift can be used indoors and outdoors, but use must comply with the manufacturer's limits for ground conditions, slope, wind and other operating conditions. Operation, maintenance and periodic inspections must follow the manufacturer's instructions. Ask us about the conditions on your own site.
Orders are dispatched directly from the factory; the HPM/T-850 and HPM/T-1000 models are usually delivered from stock. Ask us for current availability of the HPM/T-1200 and options.
The full specification table is on the personnel lift page. Tell us the height you need to reach and where you will be working via the contact page, and we will help you choose the right model.