Multi Scissor Hydraulic Freight Lifts

What is a multi scissor freight lift?

In a multi scissor hydraulic freight lift, the scissor mechanisms are stacked in stages. This layout suits applications and special projects that need a high lifting height (stroke) with a relatively small platform and relatively light loads. Pallet lifts, work platforms and personnel lifts are the most typical examples.

A platform chosen for lifting goods is not automatically suitable for carrying people; that use is assessed separately under the relevant safety and design requirements.

General features

Powerlift scissor freight lifts come in standard sizes, but most are built to suit the building and the customer requirement. Features common to all scissor types:

Steel construction
Self-lubricating, greasable bearings; self-lubricating roller bearings on the pivot points
No energy is consumed while lowering; the lowering speed can be adjusted by experienced technical staff
Operation on 220 or 380 V AC
Manual control or remote control via an electrical panel; can be adapted to PLC automation systems
Hydraulic safety valves against overloading
Hose rupture valves that stop the load from falling in case of a hydraulic leak or burst hose
Powerlift silent power unit

Standard models

Multi scissor lifts are mostly made to order, but the standard models below are also available. The table is for information; final values are stated in the offer for each project.

Model	Capacity	Platform	Lifting height	Closed height	Power
POWERLIFT.MP.Ç.24	3 t	2.0 × 2.0 m	2.4 m	660 mm	4 kW / 380 V
POWERLIFT.MP.Ç.38	1.5 t	2.2 × 2.0 m	3.8 m	700 mm	4 kW / 380 V
POWERLIFT.MP.Ç.43	1 t	2.0 × 1.8 m	4.3 m	800 mm	4 kW / 380 V
POWERLIFT.MP.Ç.45	1 t	2.1 × 1.5 m	4.5 m	800 mm	3 kW / 380 V
POWERLIFT.MP.Ç.50	2 t	2.1 × 1.2 m	5.0 m	870 mm	4 kW / 380 V
POWERLIFT.MP.Ç.60.A	1 t	1.9 × 1.1 m	6.0 m	1100 mm	3 kW / 380 V
POWERLIFT.MP.Ç.60.B	2 t	2.0 × 1.3 m	6.0 m	1200 mm	4 kW / 380 V
POWERLIFT.MP.Ç.60.C	2 t	2.0 × 2.0 m	6.0 m	1030 mm	4 kW / 380 V
POWERLIFT.MP.Ç.65.A	5 t	2.2 × 1.6 m	6.5 m	1280 mm	5.5 kW / 380 V
POWERLIFT.MP.Ç.65.B	3 t	2.2 × 1.9 m	6.5 m	1520 mm	5.5 kW / 380 V

Why choose a scissor platform over a mast type lift?

For high strokes and relatively light loads, mast type lifts are the usual choice and may look like the obvious one at first. However, a mast structure occupies space along the entire stroke, and its mechanism covers at least one side of the platform. A scissor platform, by contrast, sits in a pit, usually flush with the floor, and takes up no space until it rises; it only appears when it is needed. In short, multi scissor freight lifts are used where a mast type lift is not wanted.

For a wider platform, heavier loads and a short stroke, a single scissor lift is worth considering, and for a long platform, a tandem scissor lift. The right type is chosen together, based on the load, the dimensions and the site.

How to order

If your load and stroke are close to the ranges in the table, a multi scissor lift may suit you. Send us photos of the site and, if possible, a dimensioned drawing by e-mail or WhatsApp, and we can prepare an estimated price in a short time. The estimate is non-binding and for information only.

A detailed offer and proforma invoice require an on-site survey. Surveys are free in Denizli city centre and carried out at a reasonable rate elsewhere in Turkey. Once the final offer is approved, production starts right away under the agreed payment and delivery terms. Unless stated otherwise, offers include installation. International orders follow a separate ordering and installation procedure depending on the country.

Get a quote for your project

Use the freight lift configurator to see a preliminary design and approximate price, or contact us about a special project. Other types are on the hydraulic freight lift page.